5 Series E39 530d (M57) SAL
Illustration of gas generators, ITS head airbag:
•
1 = Gas generator, ITS head airbag, up to 09 / 2000
•
2 = Gas generator, ITS head airbag, from 09 / 2000
•
3 = Additional retaining clip to gas generator, ITS head
airbag, from 09 / 2000
Note:
If a gas generator of version up to 09 / 2000 is replaced by a gas
generator from 09 / 2000, it will be necessary to provide a bore
hole for the additional retaining clip.
The necessary conversion work is described below:
Install new gas generator from 09 / 2000.
Close additional retaining clip and push onto installed gas
generator.
Distance (A) from edge approx. 20 mm.
RA Removing and installing / replacing left or right ITS head airbag (model without
BMW AG - TIS
21.02.2013 01:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
