5 Series E39 530d (M57) SAL
VK-21, Pelz
Register/Index: 1
1 01 97 (173)
Vertrieb D
KDL d. VG's u.
Imp. z. Info
1/1997
Press-in sleeves for brakes
E39
Situation:
The press-in sleeves 34 1 130 are required for mounting the dust protection caps on the
brake piston. They replace the press-in tools used up to this point (e.g. screwdriver or
wooden splint). The sleeves are to be used, as this excludes the danger of unrecognised
damage.
Refer to Enclosure 1.
Procedure:
The press-in sleeves will be automatically distributed in accordance with the existing tools
agreement.
Refer to 5 Series E39 Repair Instructions, job item 34 11 552 and 34 21 812
SWS Press-in sleeves for brakes E39
BMW AG - TIS
21.02.2013 08:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -