5 Series E39 530d (M57) TOUR
Replace cylinder head bolts.
Unfasten cylinder head bolts from outside to inside in
sequence 14 ... 1.
Installation:
Fit new cylinder head screws.
Caution!
The glow plugs protrude at the sealing face and may be
damaged when the cylinder head is put down.
Remove cylinder head and set down in such a way that glow
plugs are not damaged.
If necessary, remove glow plugs with special tool 11 6 050 .
Note:
Drill out special tools 11 6 050 which were supplied before
4/98 to dia. 9.5 mm 20 mm deep.
Installation:
Tightening torque, 12 23 2AZ.
RA Removing and installing cylinder head (M57)
BMW AG - TIS
20.02.2013 11:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -