bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing Battery Positive Lead (between Battery Positive Connection Point And S > < 2 RA Replacing Safety Battery Terminal (SBK)|Page 833
Page 5
background image

Note:

Heat up shrink-fit hose until it has settled completely around
the connection point.

When laying the repaired battery positive cable, observe the
following:

The shrink-fit hose must not be scuffed during any

movement.

The repair cable must not cause any disturbing noises during

driving operation.

Note:

Offsetting cutting line by approx. 10 cm produces excess
length of battery positive lead (1).

Lay battery positive lead (1) without kinks or abrasions.

(Shown on E46 touring.)

RA  Replacing safety battery terminal (SBK)

BMW AG - TIS

20.02.2013  13:03

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 5 -

3 RA Replacing Battery Positive Lead (between Battery Positive Connection Point And S > < 2 RA Replacing Safety Battery Terminal (SBK)|Page 833