5 Series E39 530d (M57) TOUR
Remove protective cap (1).
Release nut and disconnect battery positive lead (2).
Remove relay (3) with base.
Unlock and remove engine fuses (4).
Disconnect plugs (5 and 6).
Disconnect plug (1) on DDE control module.
If necessary, disconnect any wiring harness connections (2).
Unscrew nut (1).
Release lock (2).
Remove diagnostic plug (3).
Release cable strap (4).
Detach profile seal (1).
Remove cable duct (2) upwards.
RA Replacing wiring harness section for engine (M57)
BMW AG - TIS
20.02.2013 13:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
