5 Series E39 530d (M57) TOUR
Unscrew bolt (1).
Lift out acoustic cover.
Unfasten screws.
Remove electronic box cover (1).
Disconnect plug (1) on DDE control unit.
If necessary, cut through any wiring harness fasteners (2).
Detach profile seal (3).
Unfasten screws.
Detach wiring harness grommet (1).
Pull out wiring harness section (2) through cable duct (3).
RA Replacing wiring harness section for injectors (M57)
BMW AG - TIS
20.02.2013 13:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
