5 Series E39 530d (M57) TOUR
Remove underbody protection from transmission.
Remove pressure line from clutch slave cylinder.
Installation:
Tightening torque,
refer to Technical Data 21 52 1AZ .
Unscrew nuts.
Pull out clutch slave cylinder.
Installation:
Tightening torque,
refer to Technical Data 21 52 5AZ .
Installation:
Clean pressure pin and support face on release lever.
Lightly grease pressure pin.
Grease, refer to BMW Service Operating Fluids.
RA Removing and installing/replacing clutch slave cylinder
BMW AG - TIS
20.02.2013 14:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -