5 Series E39 530d (M57) TOUR
Raise wheel carrier with workshop hoist.
Loosen bolt on wheel carrier and remove air spring.
Caution!
Check roll fold of pneumatic spring.
Only install pneumatic spring with a correctly formed roll fold.
The roll fold is formed when the pneumatic spring is compressed.
Seal off air connection with protective cap. This enables counter-
pressure to build up in air spring while pressing together and roll
fold forms more easily.
Check correct seating of sealing rings (1 ...2).
Note:
Do not under any circumstances grease sealing rings.
RA Removing and installing/replacing left or right air spring (touring)
BMW AG - TIS
20.02.2013 19:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -