5 Series E39 530d (M57) TOUR
Remove foam (1) in C-pillar.
Caution!
If vapors are produced when the foam is removed, these must
be extracted. Ensure the area is well ventilated.
Install spare wheel arch inner section with straightening angle set
and mark out connection points.
Mark out bores for plug welding.
Note:
In order to identify the installation position exactly, insert
screw for seat belt in addition to straightening angle set.
Drill holes for plug welding spare wheel arch inner section in body.
Clean connection points for spare wheel arch inner section.
RA Replacing complete rear left wheel arch (side wall removed) (touring)
BMW AG - TIS
20.02.2013 20:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
