bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Replacing Rear Left Side Wall (part Replacement C- And D-pillar, Top) (touring)|Page 2058 > < 5 RA Replacing Rear Left Side Wall (part Replacement C- And D-pillar, Top) (touring)
Page 2
background image

Determine separating point on C-pillar, mark points

A = 190 mm from roof edge

B = 140 mm from roof edge

Connect and separate both points.

Determine separating point on D-pillar, mark out and separate.

A = 140 mm from roof edge

Define, mark out and cut through connection point in cover for
side member.

Dimension (A) = 50 mm of last hole in side member cover 

 12

mm (1).

Cut out area of reinforcement for jack support connection point
approximately.

Expose and open connection point for D-pillar in water drain.

RA  Replacing rear left side wall (part replacement C- and D-pillar, top) (touring)

BMW AG - TIS

20.02.2013  20:21

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

5 RA Replacing Rear Left Side Wall (part Replacement C- And D-pillar, Top) (touring)|Page 2058 > < 5 RA Replacing Rear Left Side Wall (part Replacement C- And D-pillar, Top) (touring)