5 Series E39 530d (M57) TOUR
Note:
Adhesive area for plastic adhesive tapes (1) must be free of
grease and dust.
Attach two yellow plastic adhesive tapes (1) (sourcing reference:
BMW Parts Service)
to roof at distance (A) from outer corners.
Length: 400 mm
Width: 50 mm
(A) 250 mm
Using special tool 51 3 010,
first position windshield at top,
align evenly at sides,
then install at bottom and press into place.
Press windshield upwards until seal on roof abuts uniformly.
Secure windshield in this position on top with two yellow plastic
adhesive tapes (1) (Tesa).
The windshield is pretensioned at the top to prevent wind noises.
Pretension is generated with special tool 51 3 130 (three HR
foam blocks).
1 piece (1): 40 x 70 x 70 mm (W x H x D)
2 pieces (2): 40 x 30 x 70 mm (W x H x D)
Position of HR foam blocks:
HR foam block (1), middle, at distance (A) from top.
HR foam blocks (2), distance (A) from top and distance (B) at
sides.
(A) 100 mm
(B) 100 mm
Preload on top of windshield to prevent wind noise:
RA Removing and installing front windscreen
BMW AG - TIS
20.02.2013 21:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
