bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

8 RA Replacing Lumbar Support Cushion On Left Or Right Front Seat (comfort)|Page 2500 > < 7 RA Removing And Installing _ Replacing Inside Cover From Left Or Right Front Seat (
Page 1
background image

52 17 050

Replacing lumbar support cushion on left or
right front seat (comfort)

Remove back-rest,

refer to 52 17 405

Remove bottom of cover from claw-type cover clips.

Remove hose (1) (red - large cushion) and hose (2) (blue - small
cushion) from control unit (3).

Note:

If seat fixed in position, slightly heat hose, housing (valve
block) must not be unclipped (leaks). If it is unclipped, release
screws and clip together housing.

Disconnect top of lumbar support cushion (1) from spring wire (2).
Press support (3) downwards and remove lumbar support
cushion.

RA  Replacing lumbar support cushion on left or right front seat (comfort)

BMW AG - TIS

20.02.2013  22:45

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

8 RA Replacing Lumbar Support Cushion On Left Or Right Front Seat (comfort)|Page 2500 > < 7 RA Removing And Installing _ Replacing Inside Cover From Left Or Right Front Seat (