bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Left Or Right Rear Light (touring, Rear Lid) > < 1 RA Replacing A Socket Housing For Rear Light On Left Or Right (touring)
Page 1
background image

63 21 180

Removing and installing/replacing left or right
rear light (touring, side panel)

Remove socket housing for rear light (side panel).

Release nuts and remove outer rear light.

Only replace:

If necessary, convert or replace bulbs.

Installation:

Make sure rear light seal is correctly seated, replace if necessary.

Make sure there is a uniform gap A all round between rear light
and body side panel, gap approx. 2 mm.

RA  Removing and installing/replacing left or right rear light (touring, side panel)

BMW AG - TIS

21.02.2013  01:08

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing Left Or Right Rear Light (touring, Rear Lid) > < 1 RA Replacing A Socket Housing For Rear Light On Left Or Right (touring)