bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing _ Replacing Center Fresh-air Grill > < 22 RA Overview Of Defects For Independent Heating Thermo Top S
Page 1
background image

64 22 140

Removing and installing / replacing fresh-air
grill on front door trim panel

Remove door trim panel,

refer to 51 41 000

Unfasten screws (1) and lift out fresh-air grill (2) toward front out of
door trim panel.

Note:

When replacing fresh-air grill, observe the following:

(A): Version up to 3/96.

(B): Version from 3/96.

The new version (B) has an additional dome (1) which must
protrude through the cover in the door trim.

Note:

When replacing fresh-air grill, observe the following:

Version up to 3/96.

If a new fresh air grill is fitted to a door trim panel (version up to
3/96), the bore (1) in the door trim must be drilled out 

to 14 mm.

Unfasten disk (2) if necessary.

RA  Removing and installing / replacing fresh-air grill on front door trim panel

BMW AG - TIS

21.02.2013  02:06

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing _ Replacing Center Fresh-air Grill > < 22 RA Overview Of Defects For Independent Heating Thermo Top S