5 Series E39 530i (M54) TOUR
Detach plug (1) in direction of arrow.
Pull out ignition coil (2) towards top.
Note:
Procedure applies to all rod-type ignition coils.
Install special tool 12 7 050 .
Installation:
Special tool 12 7 050 is attached between spark plug and rod-
type ignition coil.
Secondary measurement:
Connect KV clip-on probe (1) of DIS Tester to special tool
12 7 050 .
Procedure on DIS Tester:
-
Select <Measurement>.
-
Select <Preset measurement>.
-
Select <Secondary ignition signal>.
-
Connect <TD cable to diagnostic head>.
-
Select <static ignition distribution>.
-
Select <Number of cylinders>.
For subsequent procedure, follow DIS instructions.
Note:
Illustration shows: KV clip-on probe (1) US version.
RA Checking rod-type ignition coils (M54, M56, N40, N42, N43, N45, N46, N52, N62, N
BMW AG - TIS
20.02.2013 12:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -