5 Series E39 530i (M54) TOUR
25 16 130
Removing and installing/replacing shiftlock
solenoid (Steptronic)
Note:
Do not twist handle during removal as this would cause the
turning lock in the knob to shear off.
Tug firmly to remove knob.
Installation:
Attach handle to selector lever. Align handle and press on
until it can be felt snapping into place.
Installation:
Push rubber gaiter (1) down until groove (2) is fully exposed.
Installation:
Push rubber gaiter (2) of panel (1) down and attach to selector
lever (4).
Connect cable plugs (3 and 5) to panel (1) and install panel
(1) in center console.
Remove trim (1) with rubber gaiter from center console.
RA Removing and installing/replacing shiftlock solenoid (Steptronic)
BMW AG - TIS
20.02.2013 15:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
