5 Series E39 535i (M62) SAL
00 11 500
Checking oil level in automatic transmission
and topping up if necessary (A5S 560Z)
Caution!
Automatic transmission fluid,
refer to BMW Service Operating Fluids and/or label on
transmission oil pan.
1. Topping up transmission after a repair:
Selector lever to setting "P".
The vehicle must be horizontal and should be secured to prevent
it from rolling away.
Unfasten filler screw (2).
Installation:
Replace sealing ring.
Tightening torque,
refer to Technical Data 24 11 7AZ
Top up automatic transmission until oil emerges at filler/overflow
bore.
Start engine.
Top up automatic transmission until oil emerges at filler/overflow
bore.
Screw in filler screw (2).
Operate brake and, with engine at idle speed, change up and
down all gears several times.
Connect BMW Diagnosis and Information System (DIS) and/or
BMW MoDiC to vehicle and perform oil level check in accordance
with instructions.
2. Checking oil level:
Connect BMW Diagnosis and Information System (DIS) and/or
BMW MoDiC to vehicle and perform oil level check in accordance
with instructions.
RA Checking oil level in automatic transmission and topping up if necessary (A5S 56
BMW AG - TIS
20.02.2013 11:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
