5 Series E39 535i (M62) SAL
11 12 105
Removing and installing left cylinder head
(M62 up to 9/98)
(Cylinder bank 5-8)
Remove left exhaust manifold,
refer to 11 62 142.
Unfasten drain plug for coolant on left engine block.
Drain and dispose of coolant.
Installation:
Replace sealing ring.
Tightening Torque,
refer to Technical Data 11 11 5AZ.
Bleed cooling system and check for water leaks,
refer to 17 00 039
Remove both cylinder head covers,
refer to 11 12 004.
Remove spark plugs,
refer to 12 12 011.
Remove coolant manifold,
refer to 11 53 325.
Remove oil lines on left and right of cylinder head.
RA Removing and installing left cylinder head (M62 up to 9/98)
BMW AG - TIS
20.02.2013 11:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -