5 Series E39 535i (M62) SAL
11 13 010
Removing and installing/replacing upper
section of oil pan (M62)
Note:
For removal of oil pan, front axle support must be lowered.
There is no need to perform a front axle alignment check.
E38 only
Note instructions on connecting and decoupling battery,
refer to General Information MG12
Disconnect negative battery lead.
Lift engine hood into assembly position.
Disconnect damper on hood, open hood fully and secure with a
screw on left and right sides.
Version 1
(acoustic cover screwed down)
Pry out sealing cap. Unscrew nuts.
Remove acoustic cover.
RA Removing and installing/replacing upper section of oil pan (M62)
BMW AG - TIS
20.02.2013 11:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -