5 Series E39 535i (M62) SAL
Note:
(3)
Install stop disk for collar bearing
(in engine block).
(4)
Install stop disk for collar bearing
(in main bearing cap).
Caution!
Check installed direction. Lubricant groove must be facing
crankshaft.
Insert stop disks for collar bearing on both sides between
crankshaft and engine block at main bearing 5.
Align thrust washers with contact face of main bearing caps.
Note:
Main bearing caps (1 to 3) are marked with punch numbers.
The main bearing caps 4 and 5 are not marked.
RA Replacing main crankshaft bearing shell (M62)
BMW AG - TIS
20.02.2013 12:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -