5 Series E39 535i (M62) SAL
Fit special tool 11 2 443 to special tool 11 2 446 / 442 and
secure with special tool 11 2 444 using the spark plug thread.
Remove piston for chain tensioner,
refer to 11 31 090.
Install special tool 11 3 390 in right timing case cover.
Tighten bow cover by turning the adjusting screw on the special
tool 11 3 390 with special tool 00 9 250 to 0.7 Nm.
Note:
If installation tolerance is unfavorable, attach special
tool 00 9 250 from underside.
Tighten sprockets in the following order:
Three accessible screws on
1.
Exhaust camshaft, left (5 to 8)
2.
Exhaust camshaft, right (1 to 4)
3.
Inlet camshaft, left (5 to 8)
4.
Inlet camshaft, right (1 to 4)
Tightening Torque,
refer to Technical Data 11 31 3AZ.
RA Adjusting camshaft timing (M62 up to 9/98)
BMW AG - TIS
20.02.2013 12:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
