5 Series E39 535i (M62) SAL
Caution!
Left-hand threads.
Fit nut (1) of sensor gear screw connection on cylinder
bank 1 to 4 and initially tighten without play, but do not tighten
down yet.
Note:
Special tool kit 11 6 450 comprises:
Special tool 11 6 451 for cylinder bank 1 to 4
Special tool 11 6 452 for cylinder bank 5 to 8
Align locating bore (1) on sensor gear of cylinder bank 1 to 4
to positioning pin on special tool 11 6 451 . Fit special tool
11 6 451 , insert screws and initially tighten without play. Press
special tool 11 6 451 downwards and align to cylinder head.
Tighten down special tool 11 6 451 .
Caution!
Left-hand threads.
Tighten down nut (1) on sensor gear screw connection.
Tightening torque, 11 36 15AZ
.
Remove special tool 11 6 451 from right cylinder head on
cylinder bank 1 to 4.
RA Replacing timing chain (M62 VANOS from 9/98)
BMW AG - TIS
20.02.2013 12:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 19 -