5 Series E39 535i (M62) SAL
11 36 585
Removing and installing/replacing solenoid
valve of camshaft adjustment unit, left
(M62 VANOS from 9/98)
Remove intake filter housing with air-mass flow sensor.
Remove fan impeller with fan clutch,
refer to 11 52 020.
Unfasten drain plug for coolant on left engine block.
Drain and dispose of coolant.
Installation:
Replace sealing ring on drain plug.
Tightening Torque,
refer to Technical Data 11 11 5AZ.
Top cup coolant. Vent cooling system and check for leaks,
refer to 17 00 005.
Pull lock (1) and detach water hose.
Installation:
Refer to general instructions for work on cooling system.
Disconnect connector.
Release screws on sealing flange.
RA Removing and installing/replacing solenoid valve of camshaft adjustment unit, le
BMW AG - TIS
20.02.2013 12:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
