5 Series E39 535i (M62) SAL
Tighten cap screw firmly home in oil pump.
Fit oil pump and tighten down with nuts (1) and (2).
Fit sprocket with chain and tighten nut.
Tightening Torque,
refer to Technical Data 11 41 4AZ.
Installation:
Adjust chain deflection (A = 10
±
2 mm) by turning
adjustment hex screw in the oil pump. Install screw and
tighten down.
Note:
Use screwdriver insert (bit), Allen key (long version) or similar
tools with long hex head. In the procedure illustrated in this
diagram, the short leg of a standard Allen key is shortened to
approx. 32 mm.
RA Removing and installing/replacing oil pump (M62)
BMW AG - TIS
20.02.2013 12:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -