5 Series E39 535i (M62) SAL
11 51 000
Removing and installing/replacing water
pump (M62 / S62)
Drain off coolant and dispose of correctly.
Installation:
Vent cooling system and check for leaks,
refer to 17 00 005.
Remove vibration damper,
refer to 11 23 010.
Remove thermostat housing,
refer to 11 53 000.
-
Remove pulley.
-
Remove coolant hose.
-
Unfasten screws.
-
Remove water pump.
Installation:
Make sure that sleeves are correctly seated.
Clean sealing faces.
Replace seal.
RA Removing and installing/replacing water pump (M62 / S62)
BMW AG - TIS
20.02.2013 12:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
