5 Series E39 535i (M62) SAL
11 53 000
Removing and installing / replacing coolant
thermostat (M62)
Remove upper section of suction filter housing with mass
air flow sensor.
Unscrew and remove splash guard.
Drain off coolant and dispose of correctly.
Installation:
Vent cooling system and check for leaks,
refer to 17 00 005.
-
Disconnect coolant hose.
-
Disconnect plug-in connection.
-
Remove thermostat housing cover with integrated
thermostat.
Installation:
Replace sealing ring.
RA Removing and installing / replacing coolant thermostat (M62)
BMW AG - TIS
20.02.2013 12:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -