5 Series E39 535i (M62) SAL
11 61 050
Removing and installing intake air manifold
(M62)
Follow instructions for disconnecting and connecting
battery,
refer to general information in MG12.
Disconnect negative battery lead.
Remove intake filter housing with air-mass flow sensor.
Release wiring harness section for engine from intake air manifold
and lay to one side with cable ducts.
If necessary, remove ASC+T throttle.
If necessary, disconnect Bowden cables for throttle actuation.
If necessary, remove throttle assembly.
Caution!
Catch and dispose of escaping fuel.
Disconnect fuel feed and return lines from injection pipe.
Note:
From 9/98 version without fuel return line.
Follow instructions for removing and installing fuel hoses,
refer to 13 53 540.
Remove connector for brake force booster.
RA Removing and installing intake air manifold (M62)
BMW AG - TIS
20.02.2013 12:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
