5 Series E39 535i (M62) SAL
Unfasten plug connections to Lambda oxygen sensors on both
sides.
Installation:
Note line routing of Lambda oxygen sensor (1) under the heat
shield!
Disconnect plug connection on reversing light switch. Note wire
routing!
Unfasten nuts on starter motor wires.
Tightening Torque,
refer to Technical Data 12 41 4AZ
RA Replacing wiring harness section for engine (M60, M62)
BMW AG - TIS
20.02.2013 12:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -