5 Series E39 535i (M62) SAL
13 41 500
Replacing idle speed control valve (M60, M62)
Interrogate fault memory of the DME control unit.
Switch off ignition.
Version 1:
(acoustic cover screwed down)
Remove seal caps (1) and unfasten nuts (2).
Remove cover from cylinder head cover.
Version 2:
(acoustic cover with press-stud fastener)
Open press-studs (1 ... 4) one at a time, at the same time lifting
the acoustic cover slightly. Once all four press-studs have been
opened, remove the acoustic cover.
Installation:
Position acoustic cover and press downwards until press-
studs (1 ... 4) click into place.
Unfasten plug connection (1).
RA Replacing idle speed control valve (M60, M62)
BMW AG - TIS
20.02.2013 13:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -