5 Series E39 535i (M62) SAL
Unfasten screws (1) to (6) and remove throttle valve neck.
Installation:
Replace seal.
Installation:
Fit brackets (1) and (2).
Cars without idle-speed control valves only:
Remove connector (1).
Disconnect vacuum lines (4).
Remove intake pipe (3) with air cleaner housing upper section (2).
RA Removing and installing/sealing throttle body (M60, M62)
BMW AG - TIS
20.02.2013 13:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -