5 Series E39 535i (M62) SAL
13 54 250
Replacing inlet hose (between mass air flow
sensor and throttle body)(M62)
Switch off ignition.
Remove hose to idle speed actuator.
Unfasten hose clip (1), pull inlet hose off throttle body.
Unscrew bolt (1).
Disconnect plug connection from mass air flow sensor.
Remove upper section of air filter with mass air flow sensor and
inlet hose.
Remove mass air flow sensor (1) from inlet hose (2) and the
resonator (3).
RA Replacing inlet hose (between mass air flow sensor and throttle body)(M62)
BMW AG - TIS
20.02.2013 13:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
