5 Series E39 535i (M62) SAL
34 32 971
Replacing both rear brake hoses
Caution!
Read and comply with General Information.
After completing work:
Bleed brake system.
Apply pedal support and press brake pedal slightly. This prevents
brake fluid from emerging from the expansion tank and air from
entering the system when the brake lines are opened.
Installation:
First attach brake hose to brake caliper and tighten down.
Then tighten connection of brake line/brake hose.
Never twist brake hose when installing it.
Tightening torque:
Refer to Technical Data.
RA Replacing both rear brake hoses
BMW AG - TIS
20.02.2013 16:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -