5 Series E39 535i (M62) SAL
With special tool 34 1 030, unfasten lock nut. Completely
unfasten lock nut and adjustment nuts from Bowden cables.
Installation:
Observe adjusting instructions and lock adjusting nuts with
lock nuts.
Remove heat protection shield (1) on tank.
Pull handbrake Bowden cable (1) out of brackets.
Installation:
Ensure proper routing of handbrake Bowden cables.
Pull handbrake Bowden cables out of body guide tubes and out of
wheel carrier.
RA Removing and installing / replacing both handbrake Bowden cables
BMW AG - TIS
20.02.2013 16:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -