5 Series E39 535i (M62) SAL
34 51 525
Removing and installing/replacing hydraulic
unit ABS/ASC+T, DSC3 up to 09/98
Note:
Note General Data, refer to 34 00...
Important!
After finishing work:
Check function of hydraulic control unit -
refer to BMW Diagnosis System.
Installation:
ABS/ASC+T, refer to 34 00 048
.
DSC3, refer to 34 00 050
.
Switch off ignition.
Disconnect battery negative lead, refer to Gr. 61
Draw brake fluid out of expansion tank with a suction bottle
reserved for exclusive use with brake fluid.
Unlock central connector (1) and pull off.
Unfasten nut (2) and remove ground wire.
Note:
Keep brake fluid out of cable connector.
RA Removing and installing/replacing hydraulic unit ABS/ASC+T, DSC3 up to 09/98
BMW AG - TIS
20.02.2013 16:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -