5 Series E39 535i (M62) SAL
51 12 000
Removing and installing complete rear
bumper
Note:
Version with trailer coupling:
Remove finisher strip.
Unfasten left/right expanding rivets and lift wheel arch finisher (1)
to one side to remove.
Version with Park Distance Control (PDC):
Unfasten cable connector.
Unfasten connector, remove and expose the cable.
Unfasten inside left/ right nuts.
Tightening torque, refer to Technical Data 51 12 2AZ
Version without Park Distance Control (PDC):
Pull bumper backwards to remove.
RA Removing and installing complete rear bumper
BMW AG - TIS
20.02.2013 19:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -