5 Series E39 535i (M62) SAL
67 61 510
Removing and installing or replacing drive
with gear for actuating slide/tilt sunroof
Necessary preliminary tasks:
•
Remove ceiling light
Remove panel and disconnect plug connection.
Note:
Secure drive with gear for actuating slide/tilt sunroof (2) against
falling out.
Release screws (1), tightening torque 54 13 1AZ
.
Note:
Screws (1) are microencapsulated.
Lower drive with gear for actuating slide/tilt sunroof (2).
Unlock plug connection (3), disconnect and remove drive with
gear for actuating slide/tilt sunroof (2).
Installation:
Insert gear wheel (1) of drive with gear for actuating slide/tilt
sunroof (2) in gear teeth.
RA Removing and installing or replacing drive with gear for actuating slide/tilt su
BMW AG - TIS
21.02.2013 01:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -