5 Series E39 M5 (S62) SAL
11 12 105
Removing and installing left cylinder head
(S62)
Special tools required:
•
00 9 120
•
11 2 250
•
11 2 300
•
11 7 120
•
11 7 130
•
11 7 150
•
11 7 200
•
12 6 050
•
12 6 410
•
12 6 411
(cylinder bank 5 to 8)
Remove left exhaust manifold.
Open drain plug on radiator. Open drain plug for coolant on right
and left sides of engine block. Drain and dispose of coolant.
Installation:
Replace sealing rings for drain plugs on engine block.
Tightening torque, refer to 11 11 5AZ .
Top up coolant. Vent cooling system and check for leaks.
Remove left intake filter housing with air-mass flow sensor.
Remove intake air manifold.
Remove both cylinder head covers.
Remove all spark plugs.
Remove fan clutch with fan impeller and fan cowl.
RA Removing and installing left cylinder head (S62)
BMW AG - TIS
21.02.2013 06:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
