5 Series E39 M5 (S62) SAL
Remove special tool 11 2 300 .
Caution!
No piston must be in the TDC position when the cylinder head
is removed.
When the VANOS adjustment unit is removed, the chain wheels
of the inlet and exhaust camshafts are not non-positively
connected to the camshafts. Camshafts on cylinder bank 5 to 8
do not rotate.
Crank engine at central bolt against direction of rotation to 45
°
before TDC position:
Remove coolant thermostat.
Remove left timing case cover (cylinder bank 5 to 8)
.
Remove chain tensioning piston.
Cylinder bank 5 to 8 (inlet side):
Remove slackened bolts. Take off spacer ring (1).
RA Removing and installing left cylinder head (S62)
BMW AG - TIS
21.02.2013 06:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -