5 Series E39 M5 (S62) SAL
Note:
If a chain tensioning piston is reused, the oil chamber in the chain
tensioner must be drained.
Install chain tensioning piston.
"No" screws are inserted in inlet sprocket wheel yet. Inlet sprocket
wheel must not slip off centering sleeve.
Rotate crankshaft from 45
°
before TDC position in direction of
rotation up to TDC firing position. Secure vibration damper in
position with special tool 11 2 300 .
Cylinder bank 5 to 8 (inlet side):
Check position of inlet chain wheel (3) to threads.
In event of large deviation (thread not visible):
Detach inlet sprocket wheel (3) from centering sleeve; in so
doing, keep timing chain tensioned, realign inlet sprocket
wheel (3) and refit.
In event of small deviation:
Position special tool 11 7 150 at toothed sleeve on exhaust
side. Align secondary chain drive to bores of inlet chain
wheel (3).
Cylinder bank 5 to 8 (inlet side):
Version up to 9/2001
Caution!
Risk of mixing up parts.
Note:
Plate spring (2) and supporting ring (3) form a set and may only
be fitted together.
Thickness of plate spring (2) = 0.85 mm.
Thickness of supporting ring (3) = 3.55 mm.
RA Removing and installing left cylinder head (S62)
BMW AG - TIS
21.02.2013 06:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
