5 Series E39 M5 (S62) SAL
Cylinder bank 5 to 8 (inlet side):
Fit spacer ring (2).
Insert all bolts and initially tighten without play.
Then slacken bolts again until spline hub (1) can be moved with
fingers.
Install left timing case cover.
Caution!
Risk of mixing up parts.
The VANOS adjustment units of cylinder banks 1 to 4 and
5 to 8 are different.
1)
Cylinder bank 1 to 4
2)
Cylinder bank 5 to 8
Note:
Install VANOS adjustment unit so that solenoid valve cables are at
bottom.
Oil is sprayed when splined shafts are pressed back. Cover
bore (1) with a cloth.
Connect special tool 12 6 050 in conjunction with special tool
12 6 411 (from special tool kit 12 6 410 ) to solenoid valves of
VANOS adjustment unit. Connect special tool 12 6 411 to
correct terminals on car battery.
Press buttons 2 and 4 on special tool
12 6 050 . Solenoid
valves are actuated.
Press splined shafts by hand up to stop into initial position.
RA Removing and installing left cylinder head (S62)
BMW AG - TIS
21.02.2013 06:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 14 -