5 Series E39 M5 (S62) SAL
Replace O-rings (1 and 2) on VANOS adjustment unit.
Coat O-rings (1) with oil as antiseize agent.
Caution!
O-rings (2) fall out very easily, secure with grease if
necessary.
Cylinder bank 5 to 8:
Turn spline hubs (1) of inlet and exhaust camshafts to right limit
position.
Cylinder bank 5 to 8:
Attach VANOS adjustment unit.
Cylinder bank 5 to 8:
Caution!
Make sure both VANOS splined shafts remain in initial
position during installation.
Rotate splined shafts of inlet and exhaust sides until spur toothing
is engaged.
Push VANOS adjustment unit with splined shaft into VANOS gear
until helical cut splines (2) are positioned shortly before meshing
with spline hub (1).
RA Removing and installing left cylinder head (S62)
BMW AG - TIS
21.02.2013 06:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 15 -