5 Series E39 M5 (S62) SAL
Cylinder bank 1 to 4 (inlet side):
Note:
The spline hub (1) accommodates a plate spring and a
supporting ring.
Take care: the supporting ring can easily fall out when removed.
Remove spline hub (1) with plate spring and supporting ring.
Cylinder bank 1 to 4 (inlet side):
Detach inlet chain wheel (3) from centering sleeve.
Keep inlet chain wheel (3) and chain tensioned.
Feed out inlet chain wheel (3).
Secure chain against slipping down.
Cylinder bank 5 to 8 (inlet side):
Remove slackened bolts. Take off spacer ring (1).
Cylinder bank 5 to 8 (inlet side):
Note:
The spline hub (1) accommodates a plate spring and a
supporting ring.
Take care: the supporting ring can easily fall out when removed.
Remove spline hub (1) with plate spring and supporting ring.
RA Removing and installing both cylinder heads (S62)
BMW AG - TIS
21.02.2013 06:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 14 -
