5 Series E39 M5 (S62) SAL
11 12 527
Remachining a valve seat (M62, S62)
(cylinder head dismantled)
Machine valve seat surface with special tool 00 3 520 or
00 3 580 in accordance with tool manufacturer's instructions.
After machining the valve-seat face on OD and bore diameter,
rework to specified diameter with correction milling tool until valve
seat width (5) is obtained.
1.
Valve-seat angle
2.
Correction angle, external diameter
3.
Correction angle, internal diameter
4.
Outside
∅
of the seat face
5.
Valve seat width
Specified values (1 to 5),
refer to Technical Data.
RA Remachining a valve seat (M62, S62)
BMW AG - TIS
21.02.2013 06:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
