5 Series E39 M5 (S62) SAL
11 12 595
Checking a valve guide for wear (M62, S62)
(valve removed)
To measure tilt clearance, insert new valve so that valve stem end
is flush with valve guide.
Mount dial gage and measure tilt clearance.
Note:
Max. permissible tilt clearance,
refer to Technical Data.
Note:
If tilt clearance is excessive, valve guide is reamed out and a
repair valve with a larger shaft diameter is installed.
If necessary, ream out valve guide,
refer to 11 12 600.
RA Checking a valve guide for wear (M62, S62)
BMW AG - TIS
21.02.2013 06:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -