5 Series E39 M5 (S62) SAL
Installation:
Install holder (1).
Insert all screws and initially tighten without play.
Installation:
To tighten down screws (2), use a commercially available
torque wrench or special tool 00 9 250.
Tighten screws (2) to 2 Nm.
Installation:
Tighten down screws (3) in several stages to 10 Nm.
Tighten down screws (4) in several stages to 10 Nm.
Installation:
Tighten down screws (2) in several stages to 10 Nm.
RA Removing and installing timing case cover, top left (S62)
BMW AG - TIS
21.02.2013 07:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -