5 Series E39 M5 (S62) SAL
Cylinder bank 5 to 8:
Align camshaft opening to locating bore in bearing cap and secure
in position with special tool 11 7 120 .
Cylinder bank 1 to 4:
Release screws on VANOS adjustment unit.
Cylinder bank 1 to 4:
Carefully lever out VANOS adjustment unit at "intended" openings
with a screwdriver on left and right.
Cylinder bank 1 to 4:
Detach VANOS adjustment unit together with toothed shafts.
RA Removing and installing/replacing toothed shafts of VANOS gear on left and right
BMW AG - TIS
21.02.2013 15:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -