5 Series E39 M5 (S62) SAL
Cylinder bank 1 to 4:
Replace O-rings (1 and 2) on VANOS adjustment unit.
Coat O-rings (1) with oil as anti-friction agent.
Caution!
O-rings (2) fall out very easily, secure with grease if
necessary.
Cylinder bank 1 to 4:
Rotate spline hubs (1) of inlet and exhaust camshafts to right
stop.
Cylinder bank 1 to 4:
Attach VANOS adjustment unit.
Cylinder bank 1 to 4:
Caution!
Ensure that both VANOS splined shafts remain in initial
position during assembly procedure.
Rotate splined shafts of inlet and exhaust sides until straight
splines are engaged.
Push VANOS adjustment unit with splined shaft into VANOS gear
until helical cut splines (2) are positioned shortly before meshing
with spline hub (1).
RA Removing and installing/replacing toothed shafts of VANOS gear on left and right
BMW AG - TIS
21.02.2013 15:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -