5 Series E39 M5 (S62) SAL
Cylinder bank 5 to 8:
Oil is sprayed when splined shafts are pressed back. Cover
bore (1) with a cloth.
Connect special tool 12 6 050 in conjunction with special tool
12 6 411 to solenoid valves of VANOS adjustment unit. Connect
special tool 12 6 411 to correct terminals on car battery.
Press button 2 on special tool 12 6 050 and simultaneously
press back toothed shaft of exhaust side by hand up to stop.
Press button 4 on special tool 12 6 050 and simultaneously
press back toothed shaft of inlet side by hand up to stop.
Cylinder bank 5 to 8:
Replace O-rings (1 and 2) on VANOS adjustment unit.
Coat O-rings (1) with oil as anti-friction agent.
Caution!
O-rings (2) fall out very easily, secure with grease if
necessary.
Cylinder bank 5 to 8:
Rotate spline hubs (1) of inlet and exhaust camshafts to right
stop.
Cylinder bank 5 to 8:
Attach VANOS adjustment unit.
RA Removing and installing/replacing toothed shafts of VANOS gear on left and right
BMW AG - TIS
21.02.2013 15:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 15 -
