5 Series E39 M5 (S62) SAL
Cylinder bank 5 to 8:
Press and hold down toggle switch button 4 on special
tool 12 6 050.
Simultaneously rotate inlet camshaft at hexagon against direction
of rotation up to stop.
Note:
The splines in the VANOS gear are now in contact; the inlet
camshaft cannot be rotated further.
Cylinder bank 5 to 8:
Alternately press toggle switch buttons 2 and 1 several times on
special tool 12 6 050.
Cylinder bank 5 to 8:
Press and hold down toggle switch button 2 on special
tool 12 6 050.
Simultaneously rotate exhaust camshaft at hexagon against
direction of rotation up to stop.
Note:
The splines in the VANOS gear are now in contact; the
exhaust camshaft cannot be rotated further.
Cylinder bank 5 to 8:
Check camshaft adjustment.
Note:
Groove on 1st bearing cap is a little wider than groove in
camshaft.
Groove on inlet and exhaust camshafts must be located
inside groove on 1st bearing cap.
RA Checking camshaft timing (S62)
BMW AG - TIS
21.02.2013 07:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
