5 Series E39 M5 (S62) SAL
Cylinder bank 1 to 4:
Fit special tool 11 7 130 to VANOS adjustment unit.
Connect compressed air (2 to 8 bar).
Cylinder bank 1 to 4:
Disconnect plug connection for solenoid valves on cylinder
bank 1 to 4.
Connect special tool 12 6 050 in conjunction with special tool
12 6 411 (from special tool kit 12 6 410 ) to solenoid valves on
cylinder bank 1 to 4. Connect special tool
12 6 411 to
correct terminals on car battery.
Alternately press toggle switch buttons 1 and 2 several times on
special tool 12 6 050 .
Caution!
Do not damage the cylinder head.
If necessary, machine open-end wrench accordingly.
Cylinder bank 1 to 4:
Press and hold down toggle switch button 1 on special tool
12 6 050 .
At same time, rotate inlet camshaft at hexagon drive against
direction of rotation as far as it will go.
Note:
Spline teeth in VANOS gear are engaged; and inlet camshaft
cannot be rotated further.
RA Replacing left camshafts (S62)
BMW AG - TIS
21.02.2013 07:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 25 -
